Sanyo PLC-XP55L Owner's Manual

Also see for PLC-XP55: Specifications

Contents

Sanyo PLC-XP55L Owner's Manual Manual pdf 34 page image

34Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to move a red frame pointer toIMAGE ADJUST Menu icon.12 Press POINT UP/DOWN button to move a red frame pointer toitem that you want to adjust and then press SELECT button.Level of each item is displayed. Adjust each level by pressingPOINT LEFT/RIGHT button(s).IMAGE ADJUST MENUPress POINT LEFT button to decrease contrast, and POINT RIGHTbutton to increase contrast. (From 0 to 63.)Press POINT LEFT button to adjust image darker, and POINTRIGHT button to adjust brighter. (From 0 to 63.)ContrastBrightnessPress POINT LEFT button to lighten color, and POINT RIGHT buttonto deeper color. (From 0 to 63.)Press POINT LEFT button or POINT RIGHT button to obtain propercolor. (From 0 to 63.)ColorTintColor ManagementThe Color management function can be used to adjust the level,phase and gamma of the selected display colors on the screen, andto replace these colors with other colors if required.The projector lets you replace up to eight colors for each image.There are four preset images for VIDEO mode and four presetimages for PC, giving a total of eight images.1 Press the POINT UP/DOWN button to move the red frame point-er to "COLOR MANAGEMENT", and then press the SELECTbutton. The COLOR MANAGEMENT menu will appear andpointer mode will be enabled. The image that was being project-ed when the button was pressed will be paused, and the COLORMANAGEMENT POINTER will appear.Use the POINT buttons to move the pointer to a section of thepaused image that contains the color that you would like toadjust, and then press the SELECT button. The mode willchange to COLOR SELECTION mode, and the color in the cen-ter of the pointer will be selected and adjustment will be possi-ble.2Use the POINT buttons to adjust the level and phase of thecolor, and then press the SELECT button to confirm the setting.Next, use the POINT buttons to adjust the gamma correction forthe color, and then press the SELECT button to accept the set-ting. When the SELECT button is pressed, the mode will changeto LIST mode.3 Press the COLOR M. button on the remote con-trol to display the COLOR MANAGEMENT menu.If you would like to check or re-adjust a colormanagement setting that has already been made,press the COLOR M. button on the remote controlonce more to change to LIST mode.NOTE;COLORMANAGEMENTPOINTERPOINTER MODEMove a red frame pointer toitem to be selected and thenpress SELECT button.IMAGE ADJUSTMenu iconPress POINT LEFT/RIGHT buttonsto adjust value.PICTURE IMAGEPICTURE IMAGE ADJUSTMENTS