Sanyo PLC-XP57L Owner's Manual

Also see for PLC-XP57L: Owner's manual Specifications Specifications Service manual

Contents

15BEFORE OPERATIONFOCUS BUTTONUsed to adjust focus. (p.22)AUTO PC ADJ. BUTTONUse to operate the AUTO PCAdjustment function. (p.26)KEYSTONE BUTTONUsed to correct keystonedistortion. (p.22, 38)IMAGE BUTTONUsed to select the imagelevel. (p.29, 33)REMOTE CONTROL OPERATIONALL OFF SWITCHLeft SideWhen using the remote control, turnthis switch to “ON.” And turn it to“ALL OFF” when it is not in use.This remote control emits laser beam from the Laser Light Window when used as a Laser Pointer. When theLASER button is pressed, the laser light goes on. When the LASER button is being pressed for more than oneminute or it is released, the light goes off. The LASER POINTER INDICATOR lights RED and LASER is emittedwith RED light to indicate the laser beam is being emitted.The Laser emitted is the Cass II laser. Do not look into the Laser Light Window or shine laser beam onto yourselfor other people. The three marks shown below are caution labels for the laser beam.CAUTION: Use of controls, adjustments, or performance of procedures other than those specified herein mayresult in hazardous radiation exposure.LASER POINTER FUNCTIONPOWER ON-OFF BUTTONUsed to turn the projector onor off. (p.20, 21)LASER BUTTONUsed to operate the LaserPointer function. The laserbeam is emitted whenpressing this button for oneminute.When using the Laser Pointerfor more than one minute,release this button and pressit again.Used as a PC mouse inWireless Mouse Operation.(p.45)MOUSE POINTERUsed as a PC mouse inWireless Mouse Operation.(p.45)RIGHT CLICK BUTTONLights red while the laserbeam is emitted from theLaser Light Window.Lights green when draggedto the “ON” position. (p.45)LASER POINTER(DRAG ON) INDICATORLENS SHIFT BUTTONUsed to select the Lens Shiftfunction. (p.22)MUTE BUTTONUsed to mute the sound.(p.23)DRAG ON/OFF BUTTONUsed to select the DRAGON/OFF position. (p.45)Used as a PC mouse inWireless Mouse Operation.Press this button and themouse pointer button to dragthe selected screen object.(p.45)LEFT CLICK BUTTONSW1 SW2 SW3 Code No.DIP SWITCH SETTINGSW4 ........ LASER ON/OFF4ON321Code 1ON ON Code 1ONCode 4ON OFFCode 2ON OFFCode 3ON ONCode 5OFF ONCode 6OFF OFFCode 7OFF ONCode 8OFFONOFFONOFFONONOFFOFF OFFINSIDE THE BATTERYCOMPARTMENT BOXThis Remote Control provides the DIPswitches into the battery compartmentbox.Slide the SW4 (LASER ON/OFFswitch) to the “OFF” position. TheLaser Pointer function is not operated.Set the Switches 1-3 as shown in tablebelow depending on the Code No. thatyou want to select as the remotecontrol code. (See page 41.)WIRED REMOTE JACKWhen using as a WiredRemote Control, connect aremote control cable (notsupplied) to this jack.Battery installation is requiredwhen using as a WiredRemote Control.LASER LIGHT WINDOWThese caution labels are put on the remote control.LASER POINTER INDICATOR