35Press the MENU button to display the On-Screen Menu.Press the POINT LEFT/RIGHT buttons to move the red framepointer to the IMAGE ADJUST Menu icon.12 Press the POINT UP/DOWN buttons to move the red framepointer to the desired item and then press the SELECTbutton. The level of each item is displayed. Adjust each levelby pressing POINT LEFT/RIGHT buttons.IMAGE ADJUST MENUPress the POINT LEFT button to decrease contrast; press thePOINT RIGHT button to increase the contrast. (From 0 to 63.)Press the POINT LEFT button to decrease the brightness; pressthe POINT RIGHT button to increase the brightness. (From 0 to63.)ContrastBrightnessPress the POINT LEFT button decrease the intensity of the color;press the POINT RIGHT button to increase the intensity of thecolor. (From 0 to 63.)Press the POINT LEFT/RIGHT buttons to adjust the tint value toobtain proper color balance. (From 0 to 63.)ColorTintColor ManagementThe Color management function can be used to adjust the LEVEL,PHASE, and GAMMA of the selected display colors (except forblack, white, and gray) on the screen and replace these colors withother colors if required.You can store up to eight (8) color management data.1 Press the POINT UP/DOWN buttons to move the red framepointer to Color management, and then press the SELECTbutton. The image being projected freezes, and the COLORMANAGEMENT POINTER appears.Use the POINT UP/DOWN/LEFT/RIGHT buttons to move thepointer to a spot where you want to adjust the color and thenpress the SELECT button. The COLOR SELECTION windowappears, and the color in the center of the pointer is selectedand you can adjust the color.2Use the POINT UP/DOWN/LEFT/RIGHT buttons to adjust theLEVEL and PHASE of the color, and then press the SELECTbutton to confirm the setting. Then use the POINT UP/DOWNbuttons to adjust the GAMMA for the color and press theSELECT button to accept the setting. After adjusting, pressthe SELECT button to go to the COLOR MANAGEMENTLIST.3 NOTE:Press the COLOR M. button on the remote controlto display the COLOR MANAGEMENT POINTER.If you would like to check or readjust the colormanagement setting that has already been made,press the COLOR M. button on the remote controlonce more to display the COLOR MANAGEMENTLIST.COLOR MANAGEMENTPOINTERPOINTER MODEPICTURE IMAGE ADJUSTMENTSPICTURE IMAGEMove the red frame pointer to item to beselected and then press SELECT button.IMAGE ADJUST Menu iconPress the POINT LEFT/RIGHT buttons toadjust the value.COLOR SELECTION MODEGo to the COLOR MANAGEMENT LIST.LIST