Sanyo PLC-XP57L Owner's Manual

Also see for PLC-XP57L: Owner's manual Specifications Specifications Service manual

Contents

43SETTINGThe PIN code can be changed to your desired four-digit number.Select “PIN code change” with the POINT DOWN button, andpress the SELECT button. A New PIN code input dialog boxappears.Select a number with the POINT LEFT/RIGHT buttons and fix thenumber with the SELECT button. Repeat it to complete entering afour-digit number. When the four-digit number is fixed, the pointerautomatically moves to “Set.” Then press the SELECT button.To Change the PIN CodeChange the PIN codeSelect PIN codechange and press theSELECT button. TheNew PIN code inputdialog box appears.The input numbersare being displayedfor confirmation.Select “Off,” “On1,” or “On2” with the POINT LEFT/RIGHT buttonsand then go to “Quit” with the POINT DOWN button. Press theSELECT button to close the dialog box.To Change the PIN Code Lock settingChanging the PIN code lock settingSelect a desired settingwith the POINTLEFT/RIGHT buttons.CAUTION:WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWNA NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMOON PAGE 60, AND KEEP IT SECURELY. SHOULD THE PINCODE BE LOST OR FORGOTTEN, THE PROJECTOR CAN NOLONGER BE OPERATED.PIN code lockThis function prevents the projector from being operated by anunauthorized person and provides the following settings forsecurity options.Off . . . . the projector is not locked with the PIN code.On1 . . . requires to enter the PIN code every time turning onthe projector.On2 . . . requires to enter the PIN code to operate the projectoronce the power cord is disconnected; as long as theAC power cord is connected, the projector can beoperated without a PIN code.Whenever you change the PIN Code Lock setting or the PIN code(the four-digit number), you are required to enter the PIN code.“1234” is set as the initial PIN code at the factory.PIN code lockWhen the projector islocked with the PINcode, the PIN codelock mark appears onthe menu bar.Entering a PIN codeQuitPointerThe input numberschange to “✳” for security.When the pointerautomatically moves to“Set,” press the SELECTbutton.To Enter a Logo PIN codeSelect a number by pressing the POINT LEFT/RIGHT buttons andfix the number with the SELECT button. The number changes to“✳.” If you fixed a wrong number, move the pointer to “Set” or“Clear” once by pressing the POINT DOWN button, then return to“PIN code.” Enter the correct number.Repeat this step to complete entering a four-digit number.When the four-digit number is fixed, the pointer automaticallymoves to “Set.” Press the SELECT button so that you can changethe PIN code lock settings.If you entered a wrong PIN code, “PIN code” and the number(✳✳✳✳) turn red and disappear. Enter a Logo PIN code all overagain.