Sanyo PLC-XP57L Owner's Manual

Also see for PLC-XP57L: Owner's manual Specifications Specifications Service manual

Contents

56APPENDIX• • • on • • • dim • • • off• • • blinking*When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicatorlights yellow, replace the projection lamp with a new one promptly. Reset the Lamp replacement counter afterreplacing the lamp.The projector is in cooling mode. It cannot be turned on untilthe READY indicator lights green.Projector ConditionLAMPREPLACEyellowIndicatorsREADYgreenLAMPredWARNINGTEMP.redThe projector detects an abnormal condition and cannot beturned on. Unplug the AC power cord and plug it again to turnon the projector. If the projector is turned off again, disconnectthe AC power cord and contact the dealer or the servicecenter for service and checkup. Do not leave the projector on.It may cause electric shock or a fire hazard.The projector is in the Power management mode.✽✽✽ The temperature inside the projector is abnormally high.The lamp cannot light up. (The projector is preparing forstand-by or the projection lamp is in cooling mode. Theprojector cannot be turned on until the cooling process iscompleted.)The lamp cannot light up. (The lamp has been cooled downenough and the projector is in stand-by mode and ready to beturned on with the POWER ON-OFF button.)✽The projection lamp reaches its end of life.Replace the lamp and then reset the Lamp replacementcounter. The indicator is turned off.