PLC-XTC50AL Expand Serial Command Functional Specifications27/768.6 Input Control Command8.6.1 CF_INPUT CommandCommand “CF_INPUT_%1” [CR]%1“1”------------------------- Select Input 1 (not switching Source)“2”------------------------- Select Input 2 (not switching Source)“3”------------------------- Select Input 3 (not switching Source)“4”------------------------- Select Input 4 (Network viewer)“UP”---------------------- Increment Input No. by 1Input1→Input2→Input3→Input4→Input1→ - - -Input1→Input2→Input3→Input1→ - - -“DN”---------------------- Decrement Input No. by 1Input1→Input2→Input3→Input4→Input1→ - - -Input1→Input2→Input3→Input1→ - - -DetailsSelect Input (Available only in the normal Power ON status)This command switches only Input No, not Source. For instance, when Input 1has been selected, receiving the command to select Input 1 does not invokesource-switching operation. That means it operates differently from “INPUT”button of Projector or Remote Control.*When selecting Input4 on a projector with PJ-Net unattached, it comes to “103”.*When selecting Input1 on a projector with PJ-Net attached and power OFF, Itcomes to “101”.Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]8.6.2 CF_SOURCE CommandCommand “CF_SOURCE_%1” [CR]%1Input 1“DIGITAL” ----------- Select Digital Input“ANALOG” ---------- Select Analog Input“SCART” ------------ Select Scart Input“HDCP” ------------- Select DVI HDCP Input“UP” ------ Select in Analog -> Scart -> DVI -> HDCP -> Analog order“DN” ----- Select in Analog -> HDCP -> DVI -> Scart -> Analog orderInput 2“VIDEO” ------------- Select Composite Video Input“YPBPR” ------------ Select Y,Pb/Cb,Pr/Cr Input“YCBCR” ----------- Select Y,Pb/Cb,Pr/Cr Input“ANALOG” --------- Select RGB“UP” --- Select in Analog -> Video -> Y,Pb/Cb,Pr/Cr -> Analog order“DN” --- Select in Analog -> Y,Pb/Cb,Pr/Cr -> Video -> Analog orderInput 3“VIDEO” ---------------Select Composite Video input“S-VIDEO” -------------- Select S-Video input“UP” ------ Select in Video -> S-Video ->Video order“DN” ------ Select in S-Video -> Video -> S-Video orderInput 4“NETWORK”, “UP”, “DN”*Input can not be selected, but above parameter is processed asAcceptable.DetailsSelect Source of currently selected Input (Available only in the normal Power ONstatus)When selected input does not include specified %1, error code “101” is returned andit is not executed.When Input No is 4 and PJ-Net power is OFF, error code “101” is returned.Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]
