Sanyo PLC-XTC50AL Specifications

Also see for PLC-XTC50AL: Owner's manual Specifications Service manual

Contents

PLC-XTC50AL Expand Serial Command Functional Specifications43/768.10.20 CF_TESTPAT CommandCommand “CF_TESTPAT_%1” [CR]%1“COLOR” ---------------------- Display Color bar“GRAD1” ---------------------- Display 16step(white→black)“GRAD2” ---------------------- Display 16step(white←black)“GRAD3” ---------------------- Display 16step(white↓black)“GRAD4” ---------------------- Display 16step(white↑black)“WHITE” ---------------------- Display all white“BALCK” ---------------------- Display all black“CROSS” --------------------- Display Cross“OFF” --------------------------Do not show test pattern display“UP” --------------------------- Switch forward“DN” ---------------------- Switch backwardDetails Execute test pattern display.(Available only in the normal Power ON status)Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]8.10.21 CF_FILH CommandCommand “CF_FILH_%1” [CR]%1 “RST” ---------------------- Reset Filter used timeDetails Reset used time for filter of projectorResponse Acceptable “000” [CR]Unacceptable “Error Code” [CR]8.10.22 CF_FILTIMER CommandCommand “CF_FILTIMER_%1” [CR]%1“0400” ---------------------- Set 400 hours“0700” ---------------------- Set 700 hours“1000” ---------------------- Set 1000 hours“OFF” ---------------------- Set Off(Do not warning display)Details Set time to display Filter cleaning / replacement warning on screenResponse Acceptable “000” [CR]Unacceptable “Error Code” [CR]8.10.23 CF_FILSCRL CommandCommand “CF_FILSCRL_%1” [CR]%1 “RST” ---------------------- Reset Filter scroll counterDetails Reset Filter scroll counterResponseAcceptable AcceptableUnacceptable “Error Code” [CR]8.10.24 CF_ FDEFAULT CommandCommand “CF_FDEFAULT_%1” [CR]%1 “RST”Details Reset to Factory Default setting(Available only in the normal Power ON status)Response Acceptable “000” [CR]Unacceptable “Error Code” [CR]