Sanyo PLC-XU300A - 3000 Lumens Manual

Also see for PLC-XU300: Specifications Owner's manual Brochure Specifications Owner's manual

Contents

Sanyo PLC-XU300A - 3000 Lumens Manual Manual pdf 26 page image

PLC-XU300/350 Expand Serial Command Functional Specifications25 / 668.6.5 CF_INPUT3 CommandCommand “CF_INPUT3_%1_”[CR]%1 “VIDEO” ----------------- Select Composite video InputDetails Select Videoinput.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.6 CF_INPUT4 CommandCommand “CF_INPUT4_%1_”[CR]%1 “S-VIDEO” -------------- Select S-video InputDetails Select S-Video input.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.6.7 CF_INPUT_%1_%2 CommandCommand “CF_INPUT_%1_%2”[CR]%1“COMPUTER1” ------ Select Computer1 Input“COMPUTER2” ------ Select Computer2 Input“VIDEO” ---------------- Select Analog Input“S-VIDEO” ------------- Select S-video Input%2When %1 is COMPUTER1“ANALOG” ----------Select Analog RGB Input“YPBPR” ------------- Select Component“SCART” ------------- Select SCARTWhen %1 is COMPUTER2“ANALOG” ---------- Select Analog RGB InputWhen %1 is VIDEO“VIDEO” --------- Select Video InputWhen %1 is S-VIDEO“S-VIDEO” ------ Select S-Video InputDetailsSelect Input specified by %1 and also Source specified by %2 at onceThis command is available in normal Power ON status.Projector returns “101” by selecting Computer 2 while Monitor out is selected inTerminal menu.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]