Sanyo PLC-XU300A - 3000 Lumens Manual

Also see for PLC-XU300: Specifications Owner's manual Brochure Specifications Owner's manual

Contents

Sanyo PLC-XU300A - 3000 Lumens Manual Manual pdf 42 page image

PLC-XU300/350 Expand Serial Command Functional Specifications41 / 668.11.4 CF_FREEZE CommandCommand “CF_FREEZE_%1”[CR]%1“ON” ------------------------ Set Freeze to ON“OFF” ----------------------- Set Freeze to OFF“UP” ------------------------------ Switch setting (On → Off → On → )“DN” ------------------------------ Switch setting (On → Off → On → )Note) “UP” and “DN” behave the same.DetailsSet/Cancel Freeze setting.Although projector returns “000”, receiving another Freeze command does notrelease Freeze operation.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.11.5 CF_VMUTE CommandCommand “CF_VMUTE_%1”[CR]%1“ON” --------------------------- Set No show ON“OFF” ------------------------- Set No show OFF“UP” ------------------------------ Switch setting (On → Off → On → )“DN” ------------------------------ Switch setting (On → Off → On → )Note) “UP” and “DN” behave the same.Details Set/Cancel No show setting.This command is available in normal Power ON status.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]8.11.6 CF_PTIMER CommandCommand “CF_PTIMER_%1”[CR]%1 “SET” ---------------Excute P-TIMERDetailsDisplay / Suspend / Cancel P-TIMERThis command behaves the same as “P-TIMER” key of Remote Control /Projector.Response Acceptable “000”[CR]Unacceptable “Error Code”[CR]