10Network Communication operation and change of stateNetwork Communication can be used under the environment which one or more computers areconnected to the projector via the network.PreparationStart up the Network Capture 5 software on the subject computer. Set standby the projector or turn iton. Check IP address of the subject computer is registered in the connection list (+p.97).Operation on the Main PC Operation on the Sub PCOn the Communicationz Executing the command "Start Communication".➔ The capture editing window appears on thescreen.Frame z Executing the command "Start Communication".Execute the command "Start Editing" on the taskbar.➔ The capture image on the Main PCappears on the screen.FrameR Bx Editing the capture image.➔ The editing information is automaticallytransferred to the Sub PC. R ➔ The editing information on the Main PC isreflected on the Sub PC. Bc Releasing the editing authority.➔ The color of authority status frame changes green. G ➔ The color of authority status frame chang-es green. G➔ The color of authority status frame changes blue. Bx Acquiring the authority.➔ The color of authority status frame chang-es red. R➔ The editing information on the Sub PC isreflected on the Main PC. Bc Editing the captured image using with thetools.➔ The editing information is automaticallytransferred to the subject PC.R➔ The color of authority status frame changes green. Gv Releasing the editing authority.➔ The color of authority status frame chang-es green. Gv Acquiring the authority.➔ The color of authority status frame changes red. R ➔ The color of authority status frame chang-es blue. Bb Repeat steps x, c if required. b Repeat steps x to v if required.n Executing the command "Capture transfer" onthe task bar.➔ Updating the editing window with a newcaptured screen image.R ➔ A new captured screen image appears onthe editing window. Bm Repeat steps x to b., Ending the communication.➔ The capture editing window disappears. R ➔ The capture editing window disappears.✐ The projector projects the edited captured image on the screen when the input mode of the projector is set"Network".✐ The command "Save Communication" can be executed in any of the mode even if the PC does not have theauthority.✐ The arrow (➔) shows a response to the command executed.✐ The execution of the command "Terminate Communication" or "End Editing" on the Sub PC has no effect on theother subject computers.Network Communication operation and change of state
