Chapter 8 Network capture functionsUsing the Network CommunicationThis Network Communication is to communicate by sharing the captured image of a computer withmultiple computers and a projector. Users can draw the text and figure on the captured image by usinga drawing tool.The data that has the captured image of a Main PC and communication information is sent to theprojector. The projector projects this data onto the screen and serves this data to other computers (SubPC) at the same time. The Sub PC receives served captured data and displays it on the screen. The MainPC and Sub PC also can edit the captured image by using the drawing tool. This edited image is appliedto all the computers automatically.Example of advanced useDisplays the presentation data stored in the computer by using the wireless mouse functionfrom the projector.1 Start capturing of the computer PC1 by using the projector.Select “Network Capture” icon from the menu and select "PC1" and then select "Connect" (+ p.94).=> The Network Capture software installed in the selected computer will start capturing.2 On the image of the PC1 projected on the screen, search a presentation file data stored in the PC1 byusing the wireless mouse function of the remote control supplied with the projector.3 Select a desired file and double click with the remote control .=> The application by which the document was created starts and the projector projects the presentation pictureon the screen.4 Start the presentation.=> By using wireless mouse function, control the page browsing and some other operations for the PC1.✐ For further instructions of the wireless mouse, please refer to the projector’s owners manual.✐ On the projected screen using with the network capture, the shape of the mouse pointer differs from the one onthe computer’s screen.PC4PC3CapturePC5PC2 PJ2PC1* PC provides the Network Capture.* Controls PC1 with wireless mouse.Project a screenimage of PC1with PJ2.Setting conditionProjectorInput mode: NetworkRegistering the connection:The IP address of thecomputer and properparameter must be set tothe PC1 (+ p.90-91).Mouse Display: "On"(+ p.93)Computer PC1Software:The Network Capture 5 isactivated.
