1Using the Real Time CaptureThis is a function to project the screen image and reproduce the sound of the computer by theprojector in real time. The captured image projected by the projector can be selected from thecomputer, web browser and the projector respectively.Registering the computersUp to 30 computers can be registered.1 Access to the control page of the projector by using the webbrowser. From the Network menu, click Capture tab to displaythe setting page.2 Switch to Connection Setting page by clicking the pagenumber tab [3]. Enter the IP address of the computer to the PCnumber, and then click Set button. Click Set button to registerthe IP address for each page.✐ When you capture the screen image of the movie player software with the real time capture function, the projectormay not be able to reproduce the sound. To reproduce the sound in the projector correctly, follow the proceduresbelow;• Start up the Network Capture 5 software first, start up the real time capture and then start up the movie playersoftware.• Terminate the movie player software first and then terminate the real time capture.✐ The registered computer enables to start capturing if only the Network Capture 5 is activated.✐ The transfer speed of the captured image using the Real Time Capture function is depending on the networkenvironment and data volume of the image. It cannot be supported for movie pictures.✐ If you start capturing with the Select capturing object on the parameter set up window checked, the Selectcapturing object window below (right side)appears. Select the desired window title fromthe window list and click OK button.If no window is opened, no window title isdisplayed on the window list as shown on theleft figure. Even the new window is opened,the display of the Select capturing objectwindow would not change. If you would liketo capture the new window opened, clickUpdate button to show the window title onthe window list, select it and click OK button.Using the Real Time Capture
