1Chapter 11 Appendix■ Although the connection between PC and the projector is established, images are not pro-jected on the screen.Make sure Wireless/Wired is selected from the Input source menu of the projector.■ Cannot be turned on/off with the web browser.Make sure the settings of the projector are correct to use the projector with it.Set the item Standby mode to "Normal" from Main menu ➔ Setting menu.Refer to “7. Controlling the projector” ➔ “ Power control and status check” (+p.66).■ Wired / Wireless input cannot be changed. Network Capture 5 cannot be operated.Restart the projector or Network Capture 5.Execute "Wired factory default" or "Wireless factory default" menu on the projector.Caution: After executing “Wired factory default" or "Wireless factory default" in the projectormenu, all the network settings you have made will return to the factory default set-tings. See the items "Wired factory default" (+p.34) and "Wireless factory default"(+p.44) for the each factory default value.■ Why doesn’t the computer screen appear on the projected screen?1. Make sure that the input mode of the projector is "Network".2. Check the parameter set up (+p.90).Make sure that the numbers of the capture port is the same as the projector’s port number. Thedefault port number is 9000. If the alert message "Invalid Port No." appears, your computer maybe using this port number already. In that case, use another port number.3. Check the IP address of the computer is registered to the projector correctly (+p.91).4. Make sure that your computer is not using the firewall function. The projector may not be ableto use the port due to this firewall function. In that case, please turn off this function temporarily.There are also some port limitations on the network equipment such as router. Please consultyour network administrator.Network capture■ Speed of playing back images are very slow.When connecting on AdHoc mode, check which Wireless channel you are using.If the computer using the same channel as yours is existing closely, the networking speed may bereduced or the communication unstable. Change the channel to resolve the problem. The channelsof the projector and projector Client computer must be the same. Or adjust the Quality selection inthe parameter setting.Refer to “Parameter set up” (+p.90).
