FS-3600 PC WorkStation Labor- 49 -Weekly Close Time Clock• The Weekly Close Time Clock should be performed on the day of the week that ends thepayroll period. This day must be programmed in the System Setup Table [Labor WeekEnd]Path:[System Configuration] à [System Setup] à [Orders/Labor]NOTE 1: A Daily Close Time Clock operation is NOT available on a labor weekending day. The Weekly Labor Close operation will automaticallyperform a Daily Close Time Clock operation.NOTE 2: If Weekly overtime is used a Weekly Close Time Clock operation mustbe performed on the appropriate Labor Week End day to assure propercalculation of overtime rates.Monthly Close Time Clock• The Monthly Close Time Clock operation can be performed at any time. Commonly it isused to report bi-Weekly and semi-monthly labor totals.• The Monthly Close Time Clock operation is used as a “period to date” reportingoperation. The descriptor “Monthly” can be changed to PTD by editing the Literal Table.Path[Strings] à [Literals] à [Literal #197 = PTD]NOTE 1: When a Monthly Close Time Clock is performed it will automaticallyperform a Daily Close Time Clock operation.NOTE 2: When a Monthly Close Time Clock is performed on a week ending dayit will automatically perform a Daily, Weekly and Monthly Close TimeClock.
