5. READ (X) AND RESET (Z) REPORTS EO1-111525.2 General Notes On Report Takings5-21(3) Close Batch (with Debit)A close batch command is sent to the EFT terminal.Sales transaction of the day is ended and a batch file is sent to the host to make a settlement.Mode Lock: Z31 [#] 2 [AT/TL]NOTES: 1. While the ECR is communicating with the EFT Terminal, “PROCESSING” is displayed.When the communication is completed successfully, ”BATCH OPENED” is displayed.2. When a response from the EFT terminal was not sent correctly, an error message is displayed.When no response was sent from the EFT terminal within a specified time (standard: 10 minutes),a timeout error occurs on the ECR and an error message “NO RESPONS” is displayed.3. The result of the processing is printed on the receipt.(4) Change Batch NumberThis operation is performed if a finalization cannot be successfully done with a Close Batch operation.Call the host company for confirmation, and change the Batch Number to the designated one.Mode Lock: Z32 [#] |Batch Number| [AT/TL]Max. 4 digits (0 to 9999)TEC STORE1343 PEACH DRIVEPHONE: 87-6437Open 8:00am to 7:00pmClosed: every Wednesday08-31-2003 SUN #3001CLOSE BACH DOKXXXXXXXXXXXXXXXXXXXXXXXXXXXXX1CL 9999 17:35TMTEC STORE1343 PEACH DRIVEPHONE: 87-6437Open 8:00am to 7:00pmClosed: every Wednesday08-31-2003 SUN #3001CHANGE BATCHZZZ91CL 9999 17:35TMThe changed BATCH NUMBER will be printed.In the case of an error, “NG” will be printed in place of “OK”.In the case of an error, a response from the EFT will be printed, also.
