10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-1115210.57 Credit Card No. Check10-583. The Recall operation is not possible after a Hold operation or during sales item entry. After thesales finalization, the Recall operation is possible.4. When a customer is being held, after the sales transaction is finalized, a buzzer tone generatestwice.5. When the Recall operation is performed for a sales transaction being held, the All Void operation isnot possible for this sales transaction. (The Void operation is possible.)6. During a Hold, Total-only type Post-issue Receipt can be issued.7. The Validation Print operation is not possible after depressing the [HOLD/RECALL] key.10.57 Credit Card No. Check- - - |Number printed on the card| [CARD CHK] - - -Max. 19 digits|Check No.|Max 15 digitsThis operation is allowed at the top of a sale or any time during a sale including while a sale is being finalized, ora received-on-account transaction is being operated. When an error results, the operator calls the manager. Themanager then can select one of the following solutions:1. Tells the customer that the card cannot be accepted referring to the displayed status code. (Or, lets theoperator do so without calling the manager.)2. To allow payment by this card as an exceptional case for some reason, depress the [C] key to clear the error,then turn the Mode Lock to “MGR” position using the MA key, and depress the [CARD CHK] key. The cardNo. is then accepted and printed.NOTES: 1. The card check function is activated in the REG mode only; in MGR or - mode, the card No. entryis accepted without an inquiry to the “Card No. Negative Check List”.Please also note that the card check function can be set to “active” or “non-active” in the MGRmode (described in Manager’s Guide.)2. It is programmable to prohibit finalizing a sale before the card check operation by programming thecompulsory card check to each media key.10.58 Receipt Post-Issue(Must be operated outside a sale)(A sale is finalized) [RECEIPT ISSUE]Programmable options:• Post-issue receipt is available only when the sale has been finalized with Receipt-OFF mode.• Available regardless of Receipt-ON/OFF mode (in this case two receipts may be obtained for one sale.)• Post-issue receipt is itemized receipt for a sale of maximum 50 lines. Exceeding 50 lines, the post-issuereceipt is total-only receipt.• Post-issue receipt is always total-only receipt regardless of the number of lines of a sale.• Post-issue receipt is issued only once.• Post-issue receipt can be issued any number of times.NOTES: 1. The post-issue receipt content will not be printed on the Remote Slip Printer.2. The post-issue receipt is not available for Paid-Out transactions.OPERATION
