10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-1115210.32 Scale Entry10-2110.32 Scale Entry(The department or PLU through which scale items are entered must be a Scale-Allowdepartment or a Scale-Compulsory PLU)(1) Auto Scale Entry (without tare/tare 2/tare 3, or with tare/tare 2/tare 3 auto-subtraction)• Through Dept: Place the item [SCALE] |Unit Weight| [@/FOR]on the scale platter.|Unit Price| [Open DEPT] - - -|Open-Dept Code| [DP#] |Unit Price| [AMT]• Through Preset-PLU: Place the item on the ([SCALE])scale platter.|Preset PLU Code| [PLU] - - -• Through Open-PLU: Place the item on the ([SCALE])scale platter.|Open PLU Code| [PLU] |Unit Price| [AMT] - - -NOTES: 1. When the PLU is programmed with a Tare Table No., the tare weight is automatically subtractedfrom the scaled weight, and thus only the net weight is processed.2. If the Tare 2 rate is programmed in the PLU table, a Tare 2 entry is performed when the abovePreset/Open PLU entry is performed.3. At the link-PLU entry, the Scale Entry can be performed for the head-link PLU but not for the sub-link PLU.(2) Auto Scale with Tare/Tare 2/Tare 3|Tare Table No.| [TARE] to be continued to the arrows marked with “(M)” in the above three1 to 9 operation sequences of the Auto Scale Entry.|Tare Table No.| [TARE] |Tare 2 Rate| [TARE 2]1 to 9 0 to 99.99 (%)|Tare 2 Rate| [TARE 2] to be continued to the arrows marked with “(M)” in the above three0 to 99.99 (%) operation sequences of the Auto Scale Entry.|Tare Weight| [TARE 3] to be continued to the arrows marked with “(M)” in the above threeoperation sequences of the Auto Scale Entry.OPERATIONFor entry with General Weight Unit .....1 to 9 (LB or Kg), 10 for 1/2 LBor 100g, 11 for 1/4LB (when theUnit Weight is different from theGeneral Weight Unit)(M)(M)(M)to be continued to the arrowsmarked with “(M)” in the abovethree operation sequences of theAuto Scale Entry.Any value other than 0,however, less than theweight of scaled itemper Unit WeightMax. 6 digitsper Unit WeightMax. 6 digitsper Unit WeightMax. 6 digits