4. PROGRAMMING OPERATIONS EO1-111554.1 Instructions for Programming4- 24.1 Instructions for ProgrammingOn the MA-600 series adopting the LCD display, each programming operation is performed by selecting thecorresponding menu item on the LCD display.The keyboard layout is automatically changed in three types according to operation to be performed (ordinaryregistration, read/reset, programming) when the Mode Lock is turned to the corresponding position.Accordingly, in addition to the character code entry method, the character entries in programming operations arealso performed directly through the ordinary type keyboard.4.1.1 Types of Keyboard LayoutsThe keyboard layout is automatically changed in three types when the Mode Lock is turned to the correspondingposition. That for programming operation is used in this chapter.(1) Keyboard layout for ordinary registration (It is programmed as default setting.)Mode Lock Position: REG, MGR,• Ordinary Type KeyboardLOGRECEIPT NS VOID RF JF 1 6 11PO RECEIPTISSUERTNMDSEALLVOID C TX/M 2 7 12R/A DOLLDISCFS/M ITEMCORR 7 8 9 3 8 13VNDCPN %-OPEN @/FOR 4 5 6 4 9 14STRCPN EX# AMT 1 2 3 5 10 15FS TLTEND ChgPLU 0 00 . ST AT/TL CHECKTEND• Flat Type Keyboard1 8LOGRECEIPT VOID ITEMCORRALLVOID RF JF2 9RECEIPTISSUE TX/M EX RTNMDSE R/A PO3 10%- C @/FOR Chg NS4 11# 7 8 9 $5.005 12AMT 4 5 6 $10.006 131 2 3 ST7 14PLU0 00 . AT/TLDepartmentkeysPLU preset-code keys
