15. GENERAL MAINTENANCE EO1-1115515.1 Cleaning the Covers15- 115. GENERAL MAINTENANCEWARNING!1. DO NOT POUR WATER directly onto the ECR, as this may cause electric shock or fire.2. The Journal Take-up Motor becomes very hot while printing. To avoid getting burned, nevertouch the Journal Take-up Motor.3. Never touch the print head and around it just after printing. You may get burned as the printhead becomes very hot during printing.4. Carefully close the receipt cover so as not to catch your fingers. You may get injured.5. Do not touch the cutter portion as you may get injured.CAUTION!Never use an organic solvent like thinners or benzene for cleaning. Using such solvents maydiscolor the cover.15.1 Cleaning the CoversWipe the covers with a soft dry cloth slightly moistened with mild detergent. After using detergent for cleaning, besure to wipe it off with a slightly moistened cloth.15.2 Removing Jammed Paper1) Turn the power OFF and disconnect the power plug from the wall inlet.2) Open the receipt cover or the journal cover.3) Remove the jammed paper. DO NOT USE any sharp implement or tool as these will damage the printer.4) Re-load the receipt roll. (Refer to Section 6.1 Installing/Replacing the Receipt/Journal Roll.)15.3 When “VOLTAGE ERROR” is displayed...When “VOLTAGE ERROR” is displayed, a hardware error including printer error could occur. In this case,immediately disconnect the power plug from the wall inlet the contact your nearest TOSHIBA TEC representative.15.4 Removing the DrawerOpen the drawer, then take the Money Case out.
