4. PROGRAMMING OPERATIONS EO1-111554.6 Commercial Message Programming4-194.6 Commercial Message ProgrammingA maximum of 96 characters of Commercial Message (32 characters x 3 lines) to be printed on the receipt isprogrammed here.Any time outside a saleMode Lock: SET1) Menu Tree2) Operation FlowchartOPERATIONCONDITION[Enter][End]“1 MESSAGES” isselected.Main Menu“1 COMMERCIALMESSAGE” is selected.Input a message inthe 1st line.Input a message inthe 2nd line.Input a message inthe 3rd line.[Enter][Enter][Enter][Enter][Enter]ECR is being outside a sale and in SET mode.Depress [1] or [Enter] key.The 1st line message is entered and theprogrammed data is printed.The ECR enters the 1st line input mode.This setting is ended. A long receipt is issuedand the display returns to Main Menu screen.Depress [1] or [Enter] key.The ECR enters the 2nd line input mode.The ECR enters the 3rd line input mode.The 2nd line message is entered and theprogrammed data is printed.The 3rd line message is entered and theprogrammed data is printed.A maximum of 32 one-byte or 16 two-bytecharacters are input.A maximum of 32 one-byte or 16 two-bytecharacters are input.A maximum of 32 one-byte or 16 two-bytecharacters are input.*: To program a message in a desired line, move the cursor there withthe [↓] key then depress the [Enter] key.*
