Tait TB9300 Installation And Operation Manual

Also see for TB9300: Installation and operation manual Installation and operation manual Installation and operation manual Specification manual Installation and operation manual

Contents

Tait TB9300 Installation And Operation Manual Manual pdf 66 page image

66 Working with Base Stations from Your PC TB9300 Installation and Operation Manual© Tait Limited March 2016Notice If you disable the front panel keypad, you cannot use it to findout the base station’s IP address. Make sure that you store the IP addresssecurely and do not lose it.4.4.7 Preparing to Download FirmwareNew versions of base station firmware are remotely downloaded to basestations from a package server (a web server application). You can set up asingle computer to be the central package server for all the base stations onyour network, using a web server of your choice. Tait also provides theMongoose 1 web server as part of the base station firmware package for usewith a temporary package server, such as a laptop.The base station firmware package is provided on the product CD, and canalso be downloaded as a zip file from the Tait support website.This procedure describes using the Mongoose web server.Installing theFirmware Package The installation procedure copies files into a folder and adds items to theWindows Start menu (Start > Programs > Tait Applications > TB9300).From the Start menu you can then access the Help, licenses, manuals andrelease notes for each firmware package, and also start Mongoose.You do not have to install Mongoose to make it work, because it is aself-contained executable file. Once started, it will run in the back-ground until stopped, or the computer is shut down. Mongoose mustalso run from the same folder as the firmware files.If you have a product CD:1. Insert the product CD into the CD drive of the package servercomputer.2. If the CD does not autorun, navigate to the CD’s root folder anddouble-click TB9300.msi to run the Windows installer.If you are downloading a base station package zip file:1. Save the zip file to a suitable location on the hard drive of the pack-age server computer.2. Extract the zip file, then navigate to the root folder and double-clickTB9300.msi to run the Windows installer.Notice Tait recommends that the maximum length of the path to thelocation of the extracted files is 100 characters. Using a longer path maycause the files to be extracted incorrectly.1. Mongoose runs on Windows only.