62 Operating in P25 trunking mode5 At the completion of the call, or if the diallednumber is busy or does not answer, press the Endleft selection key.Unconnected callsIf your call is not connected, the way your radiobehaves is explained in the following table.Radio behavior ExplanationThe system is too busy to process yourtalkgroup or individual call.The radio sounds threeshort beeps.The system is now available to process yourtalkgroup or individual call.The radio sounds fivebeeps, followed by arepeating double beep.You have selected a talkgroup that does notcurrently exist on the system. Your displayshows that you have lost service and nolonger appears.See "Service is lost" on page 56.The radio sounds twoshort beeps.You have attempted to make an individualcall to a radio that does not currently existon the system.You have attempted to make an individual orphone call, but you are not authorized to dothis.The radio sounds twoshort beeps.Your individual or phone call has beenrejected or is unanswered.SystemqueuedBusy channelnow freeTalkgroup 1No serviceMenuNo answerNo answer
