7-1Chapter 7: MaintenanceCleaning the PrinterThis section describes how to clean the printer in order tomaintain the printer in good condition.Cleaning the exteriorClean the exterior of the printer about once a month. Wipethe surface with a damp, well-wrung soft cloth. Then wipewith another dry soft cloth. For stubborn stains, moisten asoft cloth with a small amount of neutral detergent, andgently wipe the stain off.NOTE: Do not spray the detergent directly on the printer. Theliquid detergent may enter the printer through a gap andcause problems. Never use cleaning agents other thanneutral detergent.Cleaning the interiorAfter clearing paper jams or replacing the Toner Cartridge,inspect the interior of the printer before closing the topcover.CAUTION: Be sure to switch off and unplug the machinebefore accessing the interior of the machine for cleaning,maintenance, or fault clearance. Access to a live machine’sinterior can cause electric shock.CAUTION: Never touch areas labeled as “High Voltage.”You can get an electric shock.Never touch a labeled area found on or near the heat roller.You can get burned. If a sheet of paper is wrapped around theheat roller, do not try to remove it by yourself to avoidinjuries or burns. Switch off the machine immediately, andcontact your service provider.In this Chapter...• Cleaning thePrinter• When Not in Usefor a Long Time• Moving the Printer• Fuser Unit• Transfer RollCartridge
