TallyGenicom SprintPro 2265+ Quick Start Manual

Also see for 2265+: Product guide Brochure Brochure User guide Maintenance manual

Contents

Paper handling This section describes how to set the paper type, load fanfold paper and single sheets, transportpaper and move the paper to the tear position.➤ Changing the papertypeYou can change the paper type either from an application program, by means of the paper pathquick selection feature or in the Setup menu. In this section, the quick selection feature isdescribed; for detailed information on how to make this setting via the Setup menu, refer to theUser Guide on the Online CD-ROM.On some printer models, the single sheet paper source cannot be selected since these modelsare not designed for manual single sheet feeding.Make sure that the printer is in offline mode; press the Online key, if necessary.Press the Park (1) key. If fanfold paper is loaded in the printer, it is fed to the tearposition. The text tear paper off appears in the display. Then press any key. If asingle sheet is loaded in the printer, it is ejected.Use one of the marked keys to select the desired paper path, for example,Single (2).The printer returns to offline mode. The display alternates between the basic menuand the menu in the following figure:Insert a single sheet (for the procedure, see page 19, Loading single sheets).Press the Online key to set the printer to ready status. When the printer receivesdata from the computer, the single sheet is automatically loaded. Press the Load(4) key to load the single sheet before starting the printout.Offline Trac1Park Load OnlineSetup21 3 4Single Trac1OnlineSetup21 3 4 If you do not make a selection within 5 seconds, the menu is closed.Load paper fromSingle OnlineSetup21 3 4Online SingleLoad OnlineSetup21 3 4ENGLISHQuick start guide Paper handling15