TallyGenicom SprintPro 2265+ Quick Start Manual

Also see for 2265+: Product guide Brochure Brochure User guide Maintenance manual

Contents

Confirm the input by pressing the Set (1) key.Press the Setup key. The printer returns to the initial status.➤ Setting the printhead gapThe printer features automatic print head gap adjustment to the thickness of the paper used. Insetup mode, you can enter a correction value to modify the head gap that is normally determinedautomatically. This correction is useful for modifying the appearance of the type face and theimpact force for multi-layer paper.The AGA (automatic gap adjustment) function must be set to On. For more detailed informa-tion, refer to the User Guide on the Online CD-ROM.Press the Setup key. The printer changes to setup mode.Press the Adjust (2) key.Press the Head (1) key.Use the < (2) or > (3) key to set the range within which the automatic gapadjustment is to be corrected. You can select values in the range from -10 to +10.Confirm the input by pressing the Set (1) key.Press the Setup key. The printer returns to the initial status.Negative values decrease the print head gap, positive values increase it.The setting made will be retained after switching off the printer.FormAdj= 17/72"Set < > Exit OnlineSetup21 3 4 The setting made will be retained after switching off the printer. Formore details, please refer to the User Guide on the Online CD-ROM.Adjust PaperwayMenu Char OnlineSetup21 3 4TOFHead Tear OnlineSetup21 3 4Head= 0 *Set < > Exit OnlineSetup21 3 4Settings Quick start guide24