➤ Placing your printer Place the printer on a solid, flat, surface, ensuring that the printer is positioned in such a waythat it can not topple, and that there is easy access to the control panel and paper input devices.Also ensure that there is sufficient space for the printed output.If you expect that frequent forward and reverse feeds will occur,you should place the printer as shown in the figure, if possible.When selecting the printer location, observe the following additional instructions:Never place the printer in the vicinity of inflammable gas or explosive substances.Do not expose the printer to direct sunlight. If you cannot avoid placing the printer near a win-dow, protect it from the sunlight with a curtain.When connecting a computer to the printer, make sure not to exceed the maximum cablelength (see User Guide on the Online CD-ROM, Technical Specifications).Ensure sufficient distance between the printer and any heating devices/radiators.Avoid exposing the printer to extreme temperature or air humidity fluctuations. Protect theprinter from dust.It is recommended to install the printer in a place which is acoustically isolated from theworkplace because of the noise it may produce.STOPInstallation Quick start guide6