TallyGenicom SprintPro 2265+ Quick Start Manual

Also see for 2265+: Product guide Brochure Brochure User guide Maintenance manual

Contents

This device fulfils the European standards requirements by complying with the Di-rective of the Commission dated May 3, 1989 (89/336/EEC) relating to electroma-gnetic compatibility and the Directive dated February 19, 1973 (73/23/EEC) relatingto low-voltage electrical equipment. Conformity with the above mentioned Directi-ves is indicated by the CE symbol attached to the device.Note: Conformity may be affected by:■ using interface cables not complying with the specifications■ non-observance of important instructions in the operator's manual■ installing components not approved for this device by the manufacturer■ unauthorized manipulationImportant InformationThis equipment generates and uses radio frequency en-ergy and if not installed and used properly, that is, in ac-cordance with the manufacturer's instructions, may causeinterference in radio and television reception. It has beentype tested and found to comply with the limits for class Bcomputing devices in accordance with the specification insubpart J of part 15 of FCC rules, which are designed toprovide reasonable protection against such interferencein a residential installation. However, there is no guaran-tee that interference will not occur in a partial installation.If this equipment does cause interference to radio or tele-vision reception, which can be determined by turning theequipment off and on, the user is encouraged to try to cor-rect the interference by one or more of the following mea-sures:■ Reorient the receiving antenna,■ Relocate the peripheral away from the receiver,■ Move the peripheral away from the receiver■ Plug the peripheral into a different outlet, so that the pe-ripheral and receiver are on different branch circuitsIf necessary, the user should consult the dealer or an ex-perienced radio/television technician for additional sug-gestions. The user may find the following booklet,prepared by the Federal Communications Commission,helpful: “How to Identify and Resolve Radio-TV Interfe-rence Problems”.This booklet is available from the U.S. Government Prin-ting Office, Washington DC 20402 Stock No.004.000.00345.4.WARNING: To comply with FCC regulations on electro-magnetic interference for a class B computing device, theprinter cable must be shielded. To assure compliancewith FCC regulations for a computing device, use a shiel-ded interface cable with a metal shell connector. The useof cables not properly shielded may result in violatingFCC regulations.This digital apparatus does not exceed the class B limitsfor radio noise emissions from digital apparatus as set outin the radio interference regulations of the Canadian de-partment of communications.This unit complies with DOC standard C108.8-M 1983ATTENTION: Le présent appareil numérique n'ementpas de bruits radioélectriques déspassant les limites ap-plicables aux appareils numériques de la classe B pres-crites dans le règlement sur le brouillage radio-électriqueédicté par le minstère des communications du Canada.WARNING For continued protection against risk of fire, replace only with same type and rating of fuse.Only trained and qualified personnel may open covers or remove parts that are not explicitly shown and described in the User Guideas being accessible to the operator.The paper used is made of raw materials treated witha chlorine-free bleaching process.