Connections17Option 4 Using Composite CableIf your TV has a composite video input, use a composite video cable to connect the VIDEO(COMPOSITE)OUT jack on the DVD recorder to the VIDEO (COMPOSITE) IN jack on the television.SCART IN (AUX/DECODER)Video cableTVVIDEORLRLVIDEO INAUDIO INStep 3: Connecting the Audio CableOption 1 Using HDMI CableIf your TV has an HDMI input, use an HDMI cable to connect the HDMI OUT jack on the DVD recorder tothe HDMI IN jack on the television.After all connections are made, make sure related system settings are correct on the Setup menu. If there isstill no sound, go to SetupAudio OutputHDMI Audio and set ‘PCM’ as the audio output mode.If you select to use the HDMI cable in Step 2, set the HDMI output mode to ‘Video + Audio’ viaSetupVideo Input/OutputHDMI Output.Option 2 Using SCART CableIf your TV has a SCART input, use a SCART cable to connect the SCART OUT jack on the DVD recorder tothe SCART IN jack on the television.When using this connection, a separate audio cable must also be connected. See "Connecting the AudioCable" on page 17.
