Targa DRH-5500x User's Manual And Service Information
                                                                                             | |
Contents
| 
Recording47Before you start...Recording from TVCheck whether you have switched your TV’s inputsource to corresponding option (e.g. VIDEO 1, LINE 2,etc.), so that signal from the DVD recorder can appearon screen. For further information, please check theinstruction manual offered by your TV manufacturer.Check whether you select and insert a recordable disc.If you use blank DVD-RW discs, you will need to formatthe discs before recording. Follow the instructions onscreen to complete the process.Disc Information (p.7)Check whether there is enough space on the disc or onthe hard drive.Check whether the channel scanning process for yourTV is completed.Setup Menu (Tuner) (p.24)1. Select a recording mode.Press SETUP to display the Setup menu.Press to select ‘Recording/Playback’,then press or ENTER.Press to select ‘Recording Mode’, thenpress ENTER.Press to select a recording mode, thenpress ENTER.When completed, press SETUP to exit theSetup menu.2. Select the target medium to save the recording.HDDPress HDD/DVD to switch to HDD.DiscPress OPEN/CLOSE to open the disc tray.Carefully place the disc in the tray with thelabel side facing up, then press OPEN/CLOSE.3. Press TV (MODE) or SOURCE to select‘TV’ as the signal source.By default, pressing TV (MODE) allows youto switch to TV directly. However, if youhave activated the ‘SCART Bypass’ modeearlier through Setup menu, you can onlypress SOURCE to switch to TV.If you press SOURCE, you may need topress the button more than once to switchto ‘TV’.4. Press CH+ and CH- to select desired channel.You can press number buttons (0-9) toselect a channel. When completed, pressENTER for confi rmation. (For Channel 6,press 6, then ENTER. For Channel 55,press 5, 5 and ENTER.)5. Press RECORD to start recording.6. Press PAUSE/STEP to pause recordingPress STOP to stop recording.7. Press RECORD again if you need to startanother recording session.When the DVD recorder is switched on duringrecording, you can only view the recordedchannel on screen. If you would like to watcha different TV channel, you can do so byswitching your TV’s input source to tunerdevice (e.g. antenna, cable box or satellitebox). This will not affect the recording alreadyin progress. For further information on how tochange the input source, please check theinstruction manual offered by your TVmanufacturer. |
Related manuals for Targa DRH-5500x
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine