389. Press PAUSE/STEP to pause playback.Press PLAY to resume normal playback.Press STOP to stop playback.Playing Last Recorded Title(HDD Only)1. On the Easy Guider menu, press to select‘Play’, then press ENTER.2. Press to select ‘HDD’ as the sourcemedium, then press ENTER.3. Press to select ‘Last Recorded’, thenpress ENTER.4. Playback of the last recorded title will thenstart.5. Press PAUSE/STEP to pause playback.Press STOP to stop playback at a markedstop.(Press PLAY to start playback from whereyou left off.)Press STOP twice to bring the playback toa full stop.(Press PLAY to start playback from thebeginning.)Using Easy Guider: RecordYou may not be able to record a program fromTV or from another device connected to thisrecorder, if the source material is copy-protected.Please note that you CANNOT record/copy arented or purchased video/disc from anotherdevice (video cassette recorder, DVD player,DVD recorder, etc.) connected to this recorder.Before you start...Check whether you have switched your TV’s inputsource to corresponding option (e.g. VIDEO 1, LINE 2,etc.), so that video from the DVD recorder can appearon screen. For further information, please check theinstruction manual offered by your TV manufacturer.Check whether you select and insert a recordable disc.If you use blank DVD-RW discs, you will need to formatthe discs before recording. Follow the instructions onscreen to complete the process.1. On the Easy Guider menu, press to select‘Record’, then press ENTER.2. Press to select the signal source, thenpress ENTER.Disc Information (p.7)Check whether there is enough space on the disc or onthe hard drive.Check whether the channel scanning process for yourTV is completed.Setup Menu (Tuner) (p.24)If you select ‘TV’, press to select thechannel you wish to record, then pressENTER.3. Press to select ‘DVD’ or ‘HDD’ as thetarget medium to save the recording, thenpress ENTER.