Targa DRH-5500x User's Manual And Service Information
                                                                                             | |
Contents
| 
System Settings25Line 1Line 2Line 3Line 4Line 5Line 6Line 7etcVideo Input/Output Setting Component VideoOutputIf your TV supports ‘Progressive Scan’ mode, youcan choose to set the DVD recorder’s outputaccordingly to enjoy better video quality.‘Progressive Scan’ mode differs from the‘Interlaced Scan’ mode in how a video image isupdated. In ‘Progressive Scan’ mode, scan linesfor an image are refreshed in every pass and by asequential order. In the ‘Interlaced Scan’ mode,image is updated by alternating sets of odd andeven scan lines.Progressive Scan Mode:Option ApplicationTV MODE Enable or disable the ‘TV MODE/SCART Bypass’ function to controlthe viewing source alternation.Front AV Input Prioritize the input source from thefront-panel jacks.• Auto (* Use S-Video signal fi rstif available)• S-Video• CompositeVideo Output Select the type of video signalsupported by your TV.• Component-Interlaced• Component-Progressive• SCART RGB• SCART S-VideoHDMIResolutionSelect a resolution mode compatiblewith your HDTV or HD-ready TV.• Auto• 576p• 720p• 1080i• 1080pHDMI Output Select the type of contents for output.• Video+ Audio• Video OnlySetting TV MODE/SCART BypassThe ‘TV MODE/SCART Bypass’ feature allowsyou to watch videos/programs from the SCARTsource (decoder, VCR, etc.) directly at the push ofa button.You need to activate the function via the Setupmenu before using the TV (MODE) button onremote control.After you press TV (MODE) to view videos/programs from the SCART source, onlyPOWER and TV (MODE) buttons on theremote will be available to use. You can onlypress POWER to switch off the DVDrecorder, or press TV (MODE) again to returnprevious viewing mode.After you press TV (MODE) to view videos/programs from the SCART source, statusindicator will light up in the display window.Depending on the cable manufacturers, theSCART cable you use to connect an externaldevice to the DVD recorder may not be able todetect all signals transferred via thisconnection. If you have activated the ‘TVMODE/SCART Bypass’ function via the Setupmenu, and still have problem using the feature,try to use a new SCART cable.Interlaced Scan Mode:If you accidentally set ‘Progressive’ as the videooutput mode when the DVD recorder is notconnected to a progressive-scan-compatible TV,you may lose the video signal on your TV instantly.To recover the problem, switch off the DVDrecorder, and then switch it on again. After theDVD recorder is switched on (in about 30seconds), press (right direction button), 5, 0, 2,0, on remote control, then press ENTER. Therecorder will then be automatically switched off.The DVD recorder’s TV output will be restored todefault when you switch on the recorder next time.Setting HDMI ResolutionWith an integrated video upscaler, this DVD recordercan automatically enhance resolution of the outputpicture up to 1080p (1080 scan lines, Progressivemode). Select a resolution mode supported by yourTV to enjoy sharper, clearer image.The HDMI resolution setting may affect thevideo output mode of this recorder.If the HDMI resolution mode is set to ‘576p’, ‘720p’,‘1080i’ or ‘1080p’, the recorder’s video output formatwill be automatically switched to the progressive scanLine 1Line 2Line 3Line 4Line 5Line 6Line 7etc |
Related manuals for Targa DRH-5500x
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine