Tascam 788 Owner's Manual

Also see for PORTASTUDIO 788: Supplementary guide Addendum Tutorial Brief guide

Contents

Tascam 788 Owner's Manual Manual pdf 67 page image

7 – Track editing–MOVE -> PASTETASCAM 788 Digital PortaStudio 67MOVE -> PASTEThis function takes the section of a track or tracksmarked by the IN and OUT points, and moves it tothe chosen track or tracks, starting at the TO point.After the operation, the selected section of the sourcebetween the IN and OUT points is replaced bysilence.This operation overwrites anything which is alreadyrecorded at the destination. The destination is there-fore the same length as it was before the operation.You can change the following values:Src. Trk This sets the source track or tracksfrom which the section is taken. Choose 1,through8 to select an individual track. Choose 1/2, 3/4, 5/6 or 7/8 to select a pair of tracks. Choose1-8 to select all active tracks.Dst. Trk This sets the destination track ortracks to which the selected section is moved. Whatyou can select here depends on what you haveselected for the source track. If you have selected asingle track, you can select tracks 1 through 8 here.If you have selected a pair of tracks (for instance,1/2), you can only select track pairs here. If youhave selected all active tracks (1-8), then this is theonly option available to you here.Press YES to perform the operation or NO to leavethis screen.TIPYou can also use the SHIFT + INSERT key combinationto enter this function easily.MOVE -> INSERTThis function takes the section of a track or tracksmarked by the IN and OUT points, and moves it tothe chosen track or tracks, inserting it as new mate-rial, starting at the TO point.After the operation, the selected section of the sourcebetween the IN and OUT points is replaced bysilence.The insert operation adds the selected section as newmaterial to the destination. Nothing is overwritten onthe destination, as any material following the TOpoint is moved to the end of the newly-insertedsection. The destination is therefore longer than itwas before the operation.You can change the following values:Src. Trk This sets the source track or tracksfrom which the section is taken. Choose 1,through8 to select an individual track. Choose 1/2, 3/4, 5/6 or 7/8 to select a pair of tracks. Choose1-8 to select all active tracks.Dst. Trk This sets the destination track ortracks into which the selected section is inserted.What you can select here depends on what you haveselected for the source track. If you have selected asingle track, you can select tracks 1 through 8 here.If you have selected a pair of tracks (for instance,1/2), you can only select track pairs here. If youhave selected all active tracks (1-8), then this is theonly option available to you here.Press YES to perform the operation or NO to leavethis screen.OUTIN TOOUTIN TOOUTIN TOOUTIN TO