Tascam 788 Owner's Manual

Also see for PORTASTUDIO 788: Supplementary guide Addendum Tutorial Brief guide

Contents

Tascam 788 Owner's Manual Manual pdf 86 page image

9 – Effects–Making settings86 TASCAM 788 Digital PortaStudioMaking settingsWhatever type of effect has been selected for use bythe EFFECT 1 or EFFECT 2 processor, the principlesof editing are the same (the exact parameters whichcan be edited are different, of course). The details ofthese parameters are described in “Parameter details”on page 87.1 If the EFFECT screen is not shown (theexample here shows a multi-effect processor),press the appropriate EFFECT key to bring upthis screen (remember that EFFECT 2 cannotbe used as a multi-effect processor, so thisscreen can never appear if you press EFFECT2).2 With the multi-effect processor setting, use theÓ and Ákeys to change between tabs (thisallows the different parts of the multi-effectprocessor to be edited).3 Use the § and ¶ keys to move the cursor tothe parameter to be changed.4 Use the dial to change the values of the selectedparameter. The changes are instantly audible.Using the user librariesWhen you have made the effect settings that youwant, they can be stored in a library for further use.Up to 128 settings can be stored for the single stereoeffect processors, 128 for the multi-effect processors,and 128 shared between the channel and stereodynamics processors.NOTEIt is not possible to use the library space for one type ofeffect to store another type of effect.The single stereo effect library spaces may be used byboth EFFECT 1 and EFFECT 2, when they are used assingle stereo effect processors.Storing an effect in the library1 From the effect parameter edit screen, pressthe YES or NO key.2 Use the Ákey to make the SAVE tab active.3 Use the dial to scroll down to the user librarymemory where you will store the settings.4 At this point you can use the SHIFT + MENU(TITLE) key to give the library setting a titlethat you can remember in the future. See“Entering and editing titles” on page 26 fordetails.5 Press ENTER to store the settings. The displayreturns to the parameter editing screen.TIPThese settings are automatically stored on the internal diskwhen you power off the 788 (see “Shutting down the 788”on page 19).Recalling a user setting from the library1 From the effect parameter edit screen, pressthe YES or NO key.2 Use the Ó and Á keys to make the USERtab active.3 Use the dial to scroll down to the user librarymemory from where you will load the settings.4 Press ENTER to load the settings. The displayreturns to the parameter editing screen.