16 TASCAM CD-RW900MKII3 − Menu operationOperation basics1. Select the desired menu option.Press the MENU key on the front panel or remotecontrol to call up the desired menu. The menuoption PLAY will be shown on the display at first.Front panel operation: Rotate the MULTI JOG dialto select the desired menu option, then push the dialto confirm.Remote control operation: Use the SKIP key tocycle through the different menu options, then pressthe ENTER key to confirm.The sub-menu option screen of the selected menuwill be displayed.If the PLAY menu option is selected, the sub-menuoption shows up like this:NOTEReturn to the menu option selection screen, press theESCAPE key on the front panel or the CLEAR key onthe remote control.2. Select the desired sub-menu.Front panel operation: Rotate the MULTI JOG dialto select the desired sub-menu, then push the dial toenter the selection.Remote control operation: Use the SKIP key toselect, then press the ENTER key.The menu item screen of the selected sub-menu willappear. If the sub-menu PLAY MODE is selected,the menu item shows up like this:NOTETo return to the sub-menu option selection screen,press the ESCAPE key on the front panel or the CLEARkey on the remote control.3. Setting the desired menu item or value.Front panel operation: Use the MULTI JOG dial toselect the desired menu item or value. Pushing thedial enters and exits menu mode.Remote control operation: Use the SKIP key.Pressing the ENTER key confirms and exits menumode.NOTESome menu options exist for confirmation purposesonly, and the setting cannot be changed.4. How to exit menu mode after setting (or confirma-tion), during menu option display.Front panel operation: As well as pushing theMULTI JOG dial, you can use the MENU key to exitmenu mode.Remote control operation: Press the ENTER key toexit menu mode.NOTEThe selected menu mode remains after power isturned off, except the TEXT menu.To reset all the settings and return to the factory setting,use the F_PRESET sub-menu in the SYSTEM menuoption. It should only be used when a disc is not loaded.When IR REMOTE is set to Disable, some functions cannot be operated using the remote control. On the otherhand, set to Enable allows any operation using theremote control.