Tascam CD-RW900mkII Owner's Manual

18 TASCAM CD-RW900MKII4 − Playback operationsTrack searchPress the ∆/˚ search key continuously on the front panel, orthe SEARCH ∆/˚ key on the remote control. To stop thesearch function, simply release the ∆/˚ or the SEARCHkey.NOTEThe search function does not operate with MP3 discs.Normal searchUsing the number keys on the remote control, the number of thedesired track can be entered directory. Even numbers with two orthree digits can be entered easily. For example:Track 9: press ‘9’ and 009 will be displayed.Track 12: press ‘1’ and ‘2’ and 012 will be displayed.Track 103: press ‘1’ and ‘0’ and ‘3’ and 103 will be displayed.After input, press the PLAY key to start playback. Or, thePAUSE key to cue the track at its head position and enter play-back standby mode.You can also enter the track number and start playback by push-ing the MULTI JOG dial or using the ENTER key.NOTEThis function cannot be used in Program or Random mode.Selecting by track numberDirect searchBy specifying time from the start of a certain track, you can startplayback from a specified point of a specified track.ª Basic operationDuring stop, play or playback standby modes, use the numberkeys on the remote control to input the three-digit track number(such as 002 for track 2), then the desired elapsed time (***min**sec) from the start of that track.Example: To specify 1 min 30 sec from the start of track 2, input“002 001 30”.During input, the counter in the display will flash.NOTERegardless of the time display mode (see “Timedisplay switching on page 20), the time from the startof the specified track is displayed.Pressing the CLEAR key cancels the input at any stage duringinput.During stop or playback modes, when the final digit is entered,the desired position is automatically located and playback willbegin from the desired point. During playback standby mode, atthe desired point the unit will enter playback standby mode.NOTEIf a point which does not exist is entered, DirectSearch time entry mode will be cancelled.The direct search function cannot be used in programor random mode.For MP3 discs, time cannot be specified within a track.However, if you input the three-digit track number,playback will begin from the start of that track.Operation variationsEven if the final “seconds” time value is not input, playbackwill begin from the selected “minutes” time after pressing theENTER or PLAY key. Or, if you press the PAUSE key, the unitwill enter the playback standby mode at the selected point.ª Specifying a track number onlyAfter inputting the track number, press the ENTER or PLAYkey to begin playback of that track, or the PAUSE key to cue thetrack and enter playback standby mode.NOTEInstead of inputting the three-digit track number, youcan input only the desired track number.Example: To specify track 3, input only “3”.ª Specifying to the minuteAfter inputting the three-digit track number and the number ofminutes after the start of the track, press the ENTER or PLAY keyto begin playback of that track, or the PAUSE key to cue the trackand enter playback standby mode.Example: To specify 1 min 00 sec from the start of track 2, input“002 001”NOTEFollowing the above example, if “0021” is input, thesame position will be located.