Tascam CD-RW900mkII Owner's Manual

TASCAM CD-RW900MKII 194 − Playback operationsPlayback modesThere are four different playback modes. The selected mode willbe indicated on the left of the display.• Continuous playback mode (default setting): no indica-tion lamp• Single playback mode: SINGLE is lit• Program playback mode: PROGRAM red lamp is lit• Random playback mode: RANDOM red lamp is litThe playback mode can be selected using the PLAY MODE keyon the remote control unit. Pressing the key changes the playbackmode on the display in the following order:Continue®Single®Program®RandomYou can also select the playback mode using the PLAY MODEoption in the PLAY sub-menu (see “Operation basics” on page16). Turning the MULTI JOG dial clockwise changes the play-back mode shown on the display in the following order:Mode>Cont®Mode>Single®Mode>Program®Mode>RandomPressing the MENU key or pushing the MULTI JOG dialreturns to normal mode from the menu mode.While the mode can be changed from any playback mode, theexplanation in this manual will assume the user is starting fromthe Continuous mode.NOTEThe selected playback mode remains after power isturned off. However, the program playback mode willbe cleared to “Continuous” mode when the power isturned off.Continuous playbackPrograming is cancelled, and playback continues in the normalorder.1. When stopped, set the mode to display Continue orMode>Cont.2. Press the PLAY key to begin playback in order ofthe track number.Random playbackIn this mode, the unit will play back all the tracks on the disc incompletely random order, regardless of track number.When stopped, set the mode to display Program or Mode>Random.Press the PLAY key and random playback will begin.NOTEEven when the power is turned off, the unit willremain in Random mode.Program playbackThis function enables playback of selected tracks in anydesired order. Up to 99 tracks can be selected for programplayback.1. When stopped, set the mode to display Program orMode>Program.2. Use the number keys (0~9) on the remote controlunit to select each desired track for program play-back, then press the ENTER key.You can also rotate the MULTI JOG dial to select thetrack number and push to enter.The track number will be entered into the program.Repeat the above step 2 until the desired program is completed.As the program is being created, the program number and totalprogram playing time is revised on the display.NOTEIf the CLEAR key is pressed, the programmed trackwill be deleted from the last.3. When program setting is completed, press thePLAY key to begin playback of the tracks in theprogrammed order.NOTEIf the STOP key is pressed without first pressing thePLAY key, all the program data will be erased.Single-track playbackThis function enables playback of just a single track.1. When stopped, set the mode to display Single orMode>Single.2. Use the SKIP key or the number keys (0~9) on theremote control to select the desired track. TheMULTI JOG dial can be used to select the track also.3. Press the PLAY key to begin playback.After the selected track finishes, playback stops.