Tascam CD-RW901 Owner's Manual

Also see for CD-RW901: Specifications Service manual Consultant’s Specification Owner's manual Specifications

1 TASCAM CD-RW901Track searchPress the ∆/˚ search key continuously on the frontpanel, or the SEARCH ∆/˚ key on the remote con-trol. To stop the search function, simply release the ∆/˚ or the SEARCH key.NOTEThe search function does not operate with MPdiscs.Normal searchUsing the number keys on the remote control, the num-ber of the desired track can be entered directory. Evennumbers with two or three digits can be entered easily.For example:Track 9: press ‘9’ and 009 will be displayed.Track 12: press ‘1’ and ‘2’ and 012 will be displayed.Track 103: press ‘1’ and ‘0’ and ‘3’ and 103 will be displayed.After input, press the PLAY key to start playback. Or,the READY key to cue the track at its head position andenter playback standby mode.You can also enter the track number and start playbackby pushing the MULTI JOG dial or using the ENTERkey.NOTEThis function cannot be used in Program or Ran-dom mode.Selecting by track numberDirect searchBy specifying time from the start of a certain track, youcan start playback from a specified point of a specifiedtrack.Basic operationDuring stop, play or playback standby modes, use thenumber keys on the remote control to input the three-digit track number (such as 002 for track 2), then thedesired elapsed time (***min **sec) from the start ofthat track.Example: To specify 1 min 30 sec from the start oftrack 2, input “002 001 30”.During input, the counter in the display will flash.NOTERegardless of the time display mode (see “Timedisplay switching on page 0), the time from thestart of the specified track is displayed.ªPressing the CLEAR key cancels the input at any stageduring input.During stop or playback modes, when the final digit isentered, the desired position is automatically locatedand playback will begin from the desired point. Duringplayback standby mode, at the desired point the unitwill enter playback standby mode.NOTEIf a point which does not exist is entered, DirectSearch time entry mode will be cancelled.The direct search function cannot be used in pro-gram or random mode.For MP discs, time cannot be specified within atrack. However, if you input the three-digit tracknumber, playback will begin from the start of thattrack.4 − Playback operations