Tascam CD-RW901 Owner's Manual

Also see for CD-RW901: Specifications Service manual Consultant’s Specification Owner's manual Specifications

TASCAM CD-RW901 1Repeat playback1. Press the REPEAT key to turn on the repeatmode.In this mode, all the tracks on the disc are playedcontinuously. The display shows Repeat ON and theindicator lights up REPEAT.During playback, if the repeat mode is turnedon, playback continues as before, and when thelast track finishes, playback resumes from thefirst track.If the repeat mode is turned on when the deck isstopped, press the PLAY key to begin operation.2. Press the REPEAT key again to turn off repeatmode. Repeat OFF appears then the REPEAT indicatorturns off.NOTECombining the repeat mode with the program, Sin-gle-track playback and Random playback functionswill enable Program repeat, Single-track repeat andRandom repeat operations, respectively.Settings for the repeat playback mode remain afterpower is turned off, except the specified A-B sec-tion (see “A to B repeat playback” on page ).EXT SYNC playbackIn this mode, the unit will play back in synchroniza-tion with the clock selected as digital input source(OPTICAL, COAXIAL, AES/EBU).When stopped, use the EXT SYNC option in the PLAYsub-menu (see “Operation basics” on page 16) to set theexternal synch playback mode on.Select the input source for sync playback.NOTEWhen the EXT SYNC is on, and when the unit de-tects a signal other than .1kHz, synchronizationwith the clock of the selected digital input sourcemay fail, and EXT CLK Err! will be displayed. The audioplayback may also be affected.If the selected digital input source is at 48kHz, usingthe 48k Fs adjustment function allows the audio to beplayed back at the correct pitch.When stopped, and when in playback or playback readymode, press the SYNC REC key to turn the 48k Fsadjustment function on or off. When the function is on,48k Fs Adj will be displayed.The setting remains until the EXT SYNC function isset to off, and even the power is turned off.NOTEWhen the k Fs Adjustment is on, and when theunit detects a signal other than kHz, synchroni-zation with the clock of the selected digital inputsource may fail. The audio playback may also beaffected.When the k Fs adjustment is on, the Pitch controland Key control functions cannot be used.Timer playbackBy using an external timer, you can set the CD-RW901to play the loaded disc automatically when the unit isturned on by the timer.1. First, plug the power cord of the CD-RW901 intothe power outlet of the timer.2. Load a disc into the unit.3. Switch the TIMER switch on PLAY to enabletimer function on for the desired deck.When Timer playback has been turned on, thetimer icon lights up in the display.NOTEThe indicator flashes when a disc is not loaded intothe unit.4. Set the timer to the desired time. Consult thetimer’s operation manual for details. At the settime, the power to the CD-RW901 will be turnedon, and playback will automatically begin.Timer indicator4 − Playback operations