Tascam CD-RW901 Owner's Manual

Also see for CD-RW901: Specifications Service manual Consultant’s Specification Owner's manual Specifications

TASCAM CD-RW901Erasing a whole discWhen you want to erase a whole disc (all the tracks on adisc), follow the procedure below:NOTEOnce the operation is proceeded, the STOP keycannot function. Please confirm before the opera-tion.1. While stopped, press the ERASE/DEL key onthe front panel or the ERASE key on the remotecontrol. Select the ERASE DISC? by rotating theMULTI JOG dial or pressing the MENU (+/-) keyson the remote control.To cancel the operation at this point, press theERASE/DEL or the ERASE key again.2. Push the MULTI JOG dial or press the ENTER keyto enter the function. The display shows Sure?To cancel the operation at this point, press theSTOP key.3. Push the MULTI JOG dial or press the ENTERkey again to proceed the operation.The display shows Erase flashing and the remain-ing time. The unit starts counting down from atime shown on the display.4. When the disc has been erased, Complete ap-pears then Blank Disc will appear on the dis-play.Refreshing a discRefreshing the disc makes a disc usable again. Thisoperation destroys all data on the disc.1. Load the disc, and the unit in stop mode, pressthe ERASE/DEL key on the front panel or theERASE key on the remote control. Select the RE-FRESH? rotating the MULTI JOG dial or pressingthe MENU (+/-) keys on the remote control.To cancel the operation at this point, press theERASE/DEL or the ERASE key again.2. Push the MULTI JOG dial or press the ENTERkey on the remote control to enter the function.The display shows Sure?To cancel the operation at this point, press theSTOP key.3. Push the MULTI JOG dial or press the ENTERkey again to proceed the operation.The display shows Erase flashing and the remain-ing time. The unit starts counting down from atime shown on the display.4. When the disc has been refreshed, Completeappears then Blank disc will appear on thedisplay.Erasing tracksErasingThis operation erases the specified track and all sub-sequent tracks from a recorded CD-RW disc.NOTEOnce this operation has started, the STOP keycannot be used to cancel it. Please check the trackrange to be deleted first.1. While stopped, press the ERASE/DEL key onthe front panel or the ERASE key on the remotecontrol. Select the ERASE TRACK? rotating theMULTI JOG dial or pressing the MENU (+/-) keyson the remote control.To cancel the operation at this point, press theERASE/DEL or the ERASE key again.2. Push the MULTI JOG dial or press the ENTERkey to enter the function.The display shows Erase XX-XX (the number ofthe first track and last track to be erased).Rotate the MULTI JOG dial or press the MENU(+/-) key to change the track numbers you desireto erase.To cancel the operation at this point, press theERASE/DEL or the ERASE key again.3. Push the MULTI JOG dial or press the ENTERkey to operate the function.The display shows Sure?To cancel the operation at this point, press theSTOP key.4. Push the MULTI JOG dial or press the ENTERkey again to proceed the operation.The display shows Erase flashing and the remain-ing time. The unit starts counting down from atime shown on the display.5. When the tracks have been erased, Complete willappears on the display.6 − After recording