TASCAM DA-3000 193 – PreparationsTurning the power on and offPress the front panel POWER switch.Startup ScreenHome ScreenAfter the unit starts up and the startup screen is shown, theHome Screen appears.If no media is loaded in the current device, no track number ortime will be shown on the Home Screen.Turning the power OFFPress the POWER switch to turn the power OFF.No special shutdown procedures are necessary.CAUTIONDo not turn the power OFF when the unit is in use (recording,playing back, writing data to SD/CF/USB media, etc.).Doing so could cause recording to fail, recorded data to bedamaged, sudden loud noise to be output from monitoringequipment, damage to equipment and harm to hearing.Setting the date and timeThe date and time are added to recorded files based on theunit's built-in clock.1. Press the MENU button repeatedly to open the UTILITYpage, and turn the MULTI JOG dial to select CLOCK ADJST.2. Press the MULTI JOG dial to open the CLOCK ADJUSTscreen.3. Press the MULTI JOG dial again to enter setting mode. Thecursor will appear at the item to be changed.4. Turn the MULTI JOG dial to change the value and then pressit to confirm and move the cursor to the next item.5. After changing the year, month, date, hour and minute, thecursor disappears and the date and time setting ends.NOTEWhile setting the date and time, you can press the EXIT/CANCEL [PEAK CLEAR] button to cancel any changes andreturn to the menu screen.6. Press the EXIT/CANCEL [PEAK CLEAR] button to return tothe menu screen.Adjusting the brightnessWhile pressing and holding the HOME/DISPLAY button,turn the MULTI JOG dial to adjust the display and indicatorbrightness.