Tascam DA-302 Owner's Manual

21Section 7 : Recording/editing of subcode data5 When the PLAY key is pressed, playback takes placefor about 3 seconds from the captured ABS time.Then, the Play-Pause mode is engaged.·In this status, press the UP and DOWN keys simul-taneously or press the CLEAR key on the remotecontrol unit to restore the condition in step 3.6 Each time the UP key or DOWN key is pressed in thePlay-Pause mode, the captured ABS time can bechanged by +5 frames or -5 frames (up to ±2 seconds).Posi1 0¡13™45£09fi DOWN keyPosi1 0¡13™45£14ı UP keyPosi1 0¡13™45£197 Repeat steps 5 and 6 to set the desired point, thenpress the EXECUTE key. The Start ID is recordedfrom that point.7.2.3 Erasing the Start ID1 Select the deck with the SELECT 1/2.2 Press the ID MODE key so that "START ERASE"lights in the display.3 In the Stop or Play mode, press the EXECUTE key.The tape is rewound to the previous Start ID and thisStart ID is erased while it is being played.During erasing, the "START ERASE" blinks andwhen erasing is complete, the normal playback isrestored.Skip IDs are recorded to enable skip playback (úp.18).7-3-1. Recording the Skip ID… Recording on the fly1 Select the deck with the SELECT 1/2 key.2 Press the ID MODE key so that the "SKIP WRT" lightson the display.3 During recording or playback, press the EXECUTEkey at the point where you want to record the Skip ID.The "SKIP WRT" blinks and the Skip ID is recordedfor one second from that point.·When the COMMON MODE switch is set to"1&2", the Skip ID is recorded on tapes in bothDeck 1 and Deck 2 regardless of the setting of theSELECT 1/2 key.… Recording with the menu1 Select the deck with the SELECT 1/2 key.2 Press the ID MODE key so that the "SKIP WRT" lightson the display.3 Press the MENU key to show the following menu inthe time display.Posi1 –¡––™––£––4 Press the RESET key during playback to capture thecurrent ABS time. The time is shown in hours, min-utes, seconds and frames in the time display. Then, thedeck enters the Play-Pause mode.Posi1 0¡13™45£145 Press the PLAY key to play back the tape from the cap-tured ABS time for about 3 seconds. Then the Play-Pause mode is engaged.·In this status, press the UP and DOWN keys simul-taneously or press the CLEAR key on the remotecontrol unit to restore the condition in step 3.6 Each time the UP or DOWN key is pressed in the Play-Pause mode, the captured ABS time is changed by +5or -5 frames (up to ±2 seconds).Posi1 0¡13™45£09fi DOWN keyPosi1 0¡13™45£14ı UP keyPosi1 0¡13™45£197-3. Skip ID