Tascam DA-302 Owner's Manual

28Section 10 : MenuYou can change or display the settings for each mode in the Menu. The menu is shown in the time display.The menu consists of two groups. Each group is accessed differently.The tables below show the types of menus and the corresponding access methods.·Press the MENU key to switch the menu item. Press the MENU key while pressing the SHIFT key to return to the pre-vious menu item.·Use the UP/DOWN key to change the settings in the menu.·Press the COUNTER MODE key to return the menu screen to the normal time display.·Menu settings are retained even when the power is turned off.Menu (Group 1)… In the normal time display mode, press the MENU key to access the following menus.·1 (2) in the menu shows the deck selected by the SELECT 1/2 key.Menu (Group 2)… In the normal time display mode, press the MENU key while pressing the > key to access the following menus.Menu Set contents Factory preset Page to be referred for detailsSkip 1 (2) Off, On Off 18Single 1 (2) Off, On Off 18Repeat 1 (2) Off, Single, All Off 19Memo 1 (2) ABS time - - H - - M - - S 24Posi 1 (2) ABS time - - H - - M - - S 20, 21PGM 1 (2) Step No. and program No. S 01_EE 19E - - - - AH E- - - - AH AH, AB, BH AH 29DrumT 1 (2) xxxx H 29Menu Set contents Factory preset Page to be referred for detailsDig Out SPDIF, AES/EBU SPDIF 29Control Master, Slave Master 29Copy ID Proh, 1gen, Free Proh 29Peak Hold Off, Hold On Hold On 29Display Normal, Bright, Dim Normal 29Seqtime 0H 15M 00 S ~ 2H 30 M 00S 2H 00 M 00 S 29Cas Out Auto, Input Auto 29Loop Off, On Off 29