Tascam DA-302 Owner's Manual

106 RESET/MEMO (ABS) key… When pressed with the counter mode set to TapeCounter, the counter value is reset to "00 00".… When pressed with the counter mode set to ABS, thecurrent tape position point is stored in memory forlater direct access.7 DisplayDisplays different information regarding the unit’s sta-tus. The information displayed varies according to themode.1 1, 2Shows the deck selected by the SELECT 1/2 key.2 Time displayTime selected by the COUNTER MODE key isshown. Also, menu contents are shown.3 PNOLights when the program number is shown in theprogram number/margin display.4 Program number/margin display… When performing recording/rec-pause/samplingmonitor, or when the MARGIN RESET key ispressed during playback, a margin value is shown.The margin to the full scale level is shown in therange 0 dB to 39 dB. Until the MARGIN RESETkey is pressed, the margin value for the input sig-nal at maximum is maintained. If the marginvalue exceeds the full scale level, 0 blinks.… In cases than those above, the program number isshown.5 MARGLights when the margin value is shown in the pro-gram number/margin display.6 SLAVEIf more than one DA-302 is connected, and thisdeck is set to SLAVE, this indicator lights.7 DIGITAL INLights when "DIGITAL" is selected with theINPUT switch.8 Dubbing mode displayDUB MODE HIGH:Lights in the High-Speed Dubbing mode.DUB MODE NORM:Lights in the Normal-Speed Dubbing mode.DUB MODE PGM:Lights in the Program Dubbing mode.DUB MODE APPEND:Lights in the Append Dubbing mode.9 AUDIO IDLights when the Start ID Auto Writing mode isselected.4-1. Front panel1 POWER switch2 SKIP keysFor skip search. (úp.24)3 STANDBY keyWith this key ON (LED lit), the Play-Pause mode isautomatically engaged after skip search, direct search,or location search.4 EJECT keyPress to load or unload the cassette.5 COUNTER MODE keyTo switch the time mode on the time display. Each timethis key is pressed, the mode changes in the followingorder.ABS time ∑ PGM time ∑ REMAIN time ∑Tape counter… ABS (absolute) time:Shows the elapsed (absolute) time from the begin-ning of the tape up to the current position in hours,minutes and seconds.·In the Long Play mode, the displayed time differsfrom the actual time. Double the displayed time toget the actual time.… PGM (program) time:Shows the elapsed time from the beginning of eachprogram (start ID) in hours, minutes and seconds.… REMAIN time:Shows the tape remaining time.·If a "TOC (Table Of Contents)" is written on thetape (such as a commercially-available musictape), the remaining time is shown in hours, min-utes and seconds. If there is no "TOC", the time isshown in hours and minutes.·When "- -- --" is displayed, it means that theremaining time is being calculated. Once the cal-culation is complete, the time is shown.·In the Long Play mode, the displayed time differsfrom the actual time. Double the displayed time toget the actual time.… Tape counter:Counts according to the tape running.·When the "Dig Out" menu is set to "AES/EBU"(úp.28), time code is shown if it is written on thetape.