Tascam DA-78HR Owner's Manual

Also see for DA-78HR: Setup guide Technical documentation

Contents

4 - Menu interface, etc.TASCAM DA-78HR 244.6 AUDIO2 menuAudio. 2. -- This menu provides addi-tional audio parameter settings:4.7 TC menuTC -- The following parameters are used tocontrol timecode operations:REC. MUTE.(rec mute) ALL OFF. *, ALLON or individualtracks ON or OFF7.10, “REC MUTE(recording silence)”Rec mute functionDisplay Values(*=default) Described inC. FADE.(crossfade) 10* through 200(in 10 ms incre-ments)7.5, “Crossfadetimes”Crossfade time for punch, etc.Out. Patch(output patching) Normal* (nor-mal or as set)7.12.2, “Outputpatchbay”Output patchbayout. bit.(output wordlength)16, 24* 7.12.1, “Outputword length”(word length of digital output)ShTL. MoN.(shuttle monitor) 0 (off)*, 1 (on) 6.3, “Shuttle moni-tor”Shuttle monitor functionShTL. MuT.(shuttle mute) 0 (off)*, 1 (on) 6.4, “Shuttle mut-ing”Shuttle mute functionOSC.(oscillator) OFF*, 440, 1k(1k)7.9, “Sine oscilla-tor”Line-up oscillatorDisplay Values(*=default) Described inDisplay Values(*=default) Described inTAPE. TC(tape TC) TC TRK* (TCtrack), CONV(converted), ABS(absolute)9.2, “Tape time-code mode”Tape timecode sourceFRm mode(frame mode) SYS* (SYS), EXT(EXTERNAL),TAPE (TAPE):29DF*, 30ND,29ND, 25, 24,30DF9.3, “Selecting theframe mode”,9.4.1, “Showinginput timecode”,9.5.8, “Checkingthe frame mode ofstriped timecode”System frame mode and external/tape frame rate displayDISP.(TC display) TAPE* (off-tape),EXT (external),diff (difference)9.4.1, “Showinginput timecode”Timecode display sourceIn. TC. TMG(input TC timing) ANALOG*,DIGITAL9.4.2, “Timecodeinput timing”Incoming timecode referenceOUT. TC. TMG(output TC timing) ANALOG* (ana-log), DIGITAL(digital)9.4.6, “Timecodeoutput timing”Outgoing timecode referenceOUT. TC. SRC(output TCsource)TAPE tc* (fromtape), REGEN(regenerated),RESHAPE(reshaped)9.4.3, “Timecodeoutput”Source of outgoing timecodeFAST lTC(fast LTC) 5 FRm * (5frames), LEAP(leap), OFF9.4.5, “Fast lineartimecode (LTC)output”Fast LTC output mode