60 TASCAM DR-404 – Recordinglisten to and select the best one from multiple recordingsafterward.7 Press the . button to return to setting itemselection.8 Use the + and – buttons to select SOURCE, and press theENTER/MARK or / button.9 Use the + and – buttons to set the input source.SOURCE ExplanationINT MIC(default value) Record using built-in mics.EXT IN 1 Record using external inputs.When creating a stereo file, the same sound isadded to both L/R channels.EXT IN 1/2 Record using external inputs.When creating a mono recording, the Lchannel is recorded.10 Press the . button to return to setting itemselection.11 When setting is complete, press the (HOME) [8]button to return to the Home Screen.Select the file you want to overdubUse the . and / buttons and the BROWSE screen toselect that files that you want to overdub.NOTESee "Working with Files and Folders (BROWSE Screen)" onpage 69 for selecting files using the BROWSE screen.Start the overdubbing1 Press the RECORD [0] button to set the unit to recordstandby.MIX recording Separate recordingWhen in MIX mode, press the 1/2 [SOLO] button to mutemonitoring of the input sound.When in SEPARATE mode, if there are two playback files,press the 3/4 [SOLO] button to switch between the inputsound and the playback file. If there is only one file, thismutes the input sound.2 Press the RECORD [0] button to start overdubbing.MIX recording Separate recording
