TASCAM DR-40 97TASCAM DR-40 has a built-in tuner. The unit receives a soundfrom a musical instrument and allows you to tune it accuratelyon the tuning meter shown in the display.Using the tunerSetting the tuner1 Press the MENU button to open the MENU screen.2 Use the + or − button to select OTHERS, and press theENTER/MARK or / button to open the OTHERSsubmenu.3 Use the + or − button to select TUNER, and press theENTER/MARK or / button.TUNER screen appears.The TUNER screen contains the CALIB option to set thefundamental frequency of the A. Press the . or /button to decrease or increase the fundamental frequency.Setting range: 435Hz - 445Hz (in 1 Hz increments, default:440Hz)Tuning a musical instrument1 Open the TUNER screen, and sound a note near the unit.2 Tune the instrument so that the target pitch nameappears and the center of the tuner lights.A bar appears on the left or right of the center if the soundis lower or higher than the target pitch. The bar becomeslonger as the sound shifts away from the target pitch.NOTEThe tuner can only be used with the built-in mics.10 – Tuning a Musical Instrument (Tuner)
