92 TASCAM DR-40The DR-40 has built-in effects that can be applied to the inputsignal during recording and practice. They can also be appliedto the output signal during playback.The icon appears as light letters on a dark background.Effects ON indicationSetting the effect1 Press the MENU button to open the MENU screen.2 Use the + or − button to select OTHERS, and press theENTER/MARK or / button to open the OTHERSsubmenu.3 Use the + or – button to select EFFECT, and press theENTER/MARK or / button.The EFFECT screen appears.As shown in the above illustration, there are four settingitems on the EFFECT screen.Set each item using the . or / buttons or + or –buttons.EFFECT:Use this to turn the effect on or off.The default setting is OFF.PRESET:See the Effects Preset List on page 93 for details about thepreset effects.LEVEL:Use this to change the output level of the preset effectselected in the PRESET item.Setting range: 0 - 20SOURCE:You can choose one of the following as the sound that theeffect is applied to (default value: MIX).SOURCE ExplanationMIX (defaultvalue) Apply the effect to the output of an overdubbedrecording or a mixed down recordingINT MIC ST Apply the effect to signals input through thebuilt-in micsEXT IN 1/2 Apply the effect to signals input throughexternal mics or equipment8 – Using the Effects
