62 TASCAM DR-40If you record again using the same playback file (File-A), thefile name of the new recording will be as follows.File-F: TASCAM_0006S12.WAVIn this mode, each time you record with the same playbackfile, the number in item 2 increases by one for the name ofeach new file.1: Set with the WORD item on the FILE NAME screen2: Recording file base number3: “S” is the source file and “V” is the virtual file4: Assigned channels (“12” is channels 1/2 and “34” ischannels 3/4)6: Backup number in the virtual fileNOTEIn OVERDUB SEPARATE mode, the base number of the•recording file and “S12” are added to the file name of theplayback file.If writing files copied from elsewhere is not possible, enable•writing using a computer, for example.Recording automatically (AUTO REC)This function allows the unit to respond to input sound levelsand start and pause recording, as well as set marks and createnew files, for example.1 Press MENU to open the MENU Screen.2 Use the + or – button to select REC SETTING, and pressthe ENTER/MARK or / button.REC SETTING screen appears.3 Use the + or – button to select the MODE and press theENTER/MARK button or / button.4 Use the + or – button to set the MODE of the AUTO RECsetting.OFF(Default): OffREC: Records and pauses automaticallyMARK: Sets marks automatically during recording4 – Recording
