TASCAM DR-40 61When recording starts, the indicator lights and the displayshows the elapsed and remaining recording times.The following error message appears if the selected filecannot be played back.3 To stop recording, press the (HOME) [8] button.File names when recording in overdubbingWhen overdubbing, file names are generated differentlyaccording to the DUB mode setting.SEPARATE mode8Playback fileFile-A: TASCAM_0004S12.WAVThe newly recorded file (recorded without the playbacksignal)File-B: TASCAM_0004S34.WAVIf you record again using the same playback file (File-A),the name of File-B above is changed to the file name below(File-C), and the new recording file is given the File-B filename.File-C: TASCAM_0004V34t1.WAVIf you record one more time using the same playback file(File-A) (and File-B and File-C above are saved), the file namefor File-B changes as shown below, with the number at 6increased by one, and the new recording file given the File-Bfile name.File-D: TASCAM_0004V34t2.WAVMIX mode8Playback fileFile-A: TASCAM_0004S12.WAVThe newly recorded file (recorded with the playback signal(File-A))File-E: TASCAM_0005S12.WAV4 – Recording
