TASCAM DR-680 274 Press the key again to open the USER WORDedit screen.5 Use the DATA wheel to select the user word thatyou want to edit, and press the ENTER key.6 Use the following keys to edit the user words./ keys: Move the cursor.DATA wheel: Select characters.¯ key: Add a space at the cursor position. key: Erase the character at the cursorposition7 When you have finished editing a user word,press the ENTER key.8 Press the MENU key to return to the selection ofitems on the REC screen. Press the HOME/FUNCkey to return to the Home Screen.Available recording time displayAvailable recording time varies according to theSD card capacity and the file format, file mode andsampling frequency settings. (See “Recording times”on page 36.)You can check the amount of time available forrecording using the inserted SD card on the HomeScreen. When recording or in recording standbypress the DISPLAY key to switch between showingthe elapsed recording time (of the current recording)and the remaining available recording time. Whenthe remaining available recording time is shown, itappears as a negative number.Set the folder for saving takesYou can set the folder where recorded takes are saved.(See “Folder operations” on page 38.) By default,recorded takes are saved in the “PROJECT0000” folderthat is automatically created under the "MUSIC" folder.Connecting other equipmentConnect microphones and other external equipment asshown in the figure below.MicrophonesInput settingsThis unit has 6 analog mic/line inputs and a stereodigital input.6 tracks and a stereo track can be recorded for a totalof 8 tracks.The inputs recorded on the tracks are as follows.Track InputTracks 1/2 Analog inputs 1/2Tracks 3/4 Analog inputs 3/4Tracks 5/6 Analog inputs 5/6 or digital inputStereo track Stereo mix of inputs 1–6 or digitalinputSet the recording source for the stereo track on theREC screen. (See “Stereo track recording settings” onpage 25.)4 – Recording